LG LHD65EBL Dehumidifier "bucket error" Questions

...bucket full error when the bucket is empty. Turning the unit off for a half hour will reset the fault. This reset will allow the unit to run for about twelve hours and then it happens again. The Unit ...

...bucket back into place and hit the start button and nothing happen I unplugged the unit and error code E2 keeps comming on What does an E2 code mean? I have a Haier Dehumidifier that is about a year ...

...error message CH 1 and says the bucket is full. There is no water in the bucket. Hi, Here is a tip that explains what can be happening to make the dehumidifier show that the bucket is full when it is ...

error code CH 01 code is on panel, and "bucket full" light is flashing. The bucket is not full, and dehumidifier will not run. We cleaned the filter and coils, which did nothing. Hi, Here is

...error code & blinking "bucket full" light unplugging; playing with bucket switch. worked briefly when I took it out of the wall. It is a well know problem , you need to replace the bucket ...

error and will not start. he Bucket is empty. Ideas way? Hi, Here is a tip that explains what can be happening to make the dehumidifier showthat the bucket is full when it is not. Dehumidifier Problem

...bucket and the error remains I would recommend checking around where the bucket goes as there should be a switch that gets pressed by the bucket when it is in the proper position. My guess would be ...

...bucket full switch did not change the 01 error ln the LED -- still won't work Just replaced sensor 6877A30013L per Solution #2. No help. Still flashing 01. Shorted out the bucket level microswitch ...

...error, at least for the last 5 days. Remove the bucket, and reach up behind the front panel where there is a filter- ours was covered in dust. After cleaning this off, and resetting the machine (by ...

What does an E1 error message mean? Water bucket full or switch is depressed under the bucket, check.