LG LHD65EBL Dehumidifier "remove ch" Questions

...to do to get it to run again??? CH 01 Indicates that water collection tank is full and needs to be removed & emptied. Turn the unit OFF and unplug it, before removing the

...up. Any idea what the problem is? CH 01 usually indicates that the filter is dirty and needs to be removed and cleaned. Turn the unit OFF and unplug it, before removing the filter. Never operate the ...

buckets on with bungie cords; they shake some and the bucket full sensor thinks the bucket has been removed

...that the bucket is full. The bucket is in fact empty. The LED lights read "CH 01". I have removed and cleaned the filter above the bucket. Any suggestions? Hi, Here is a tip that explains ...

LG dehumidifier, Model: LD651 EBL. Problem: not working while Bucket Full red light keeps blinking; Display keeps showing "CH" and "01". Removing the bucket then pushing the red button couldn't stop ...

...CH" and the % Set shows "01". The filter, coils, and bucket have been cleaned. This will need to be serviced. LG has a 5 year warranty on these models. They usually will tell you of a service center ...

Tank full light flashes & unit will not operate, but is attached to a hose I removed the overflow switch and took it to be tested. It was not defective. I replaced it and waited a few days and the ...

...CH 24. Leo, have you removed and emptied the buck and reinstalled it? If not, that's the first thing you need to do. If you have already done that, remove the bucket and if it's equipped with ...

...CH 1. After it stopped working for a couple of days I would turn it on and off to see if it would start working again and it did once for a while but now it won't and still says the same thing. I ...

ch 01 code.bought 13 mouths ago Mine did the exact same thing, I replaced the wiring to the humidity sensor, water full switch and coil sensor, they are all connected to one plug on the board, part no