Sunfire True Sub MK II Subwoofer "level" Questions

hook up lower level input to the audio source 230 subwoofer but can't get any sound for the speaker that is hook up through the speaker level input or output. The speaker level connectors on the sub ...

How do u hook up the infinity entra sub it has speaker level(input and output) that look like these red and black spots r for spearker wires and then line level input so I connect my music to the rca ...

...This means it has a built in amplifier. These active subs usually provide for one or both "low level" and "high level" inputs. Low level signals are usually carried by shielded coaxial cables

what volume level should I set the sub at please. I have a Marantz 7005 av amp and when using Audyssey to set up, the slam from the sub is miniscule. I normally set it a 50% volume when setting up,can

manual to connect sw8 sub connecting a specker to the sub The SW8 and SW150 have line level and speaker level inputs. It has a line level output, which will not drive speakers without using a separate

...it up on thier website. Here is what they say. Warning: This product is designed to work with line level outputs or headphone outputs only. DO NOT connect it directly to speaker outputs as it will ...

vocopro sub 1500 ...looking for impeadence of speaker Line level is known as 600 ohm line signal where the output impedance is 600 ohms and the input impedence is between 10,000 to ~ 50,000 ohms. ...

...woofer Followed installation instructions, but low volume results. Have you adjusted the subwoofer level? there should be buttons on the remote to adjust this level. Also, make sure you are not in a

...have to turn off and on to get sound Here is something you can try. On your source check the output level for your sub. Try setting up at a higher level, if at 1 set it for 2 or 3 Then adjust the ...

Which is the best way to hook up a Subwoofer? Subwoofer out from amp with RCA cable; or, high-level speaker output from amp to high-level speaker input on subwoofer amp, then out to left and right ...