chisel is stuck wont come out Remove chuck assy and see if it will release, it might need a bit of help with a vice. If not then it will have to be taken apart and pressed out.
Hammer not Jacking Mine stopped and I took it apart and found a badly worn piston gasket. I can't however find a new gasket. Anyone know where to get parts for the sky687 hammer drill then let me know
...has eased off and I am concerned the source has depleted and may need replenishing. If I pull it apart will I find an area which requires grease to lubricate the moving parts. I'd imagine the ...
...look at the commutator for discoloration between the bars. It sounds like you need to take motor apart before it causes major damages if not ...
...is next to an allen screw (one of four) that hold the tool holder to the barrel. I have taken it apart. Suggestions? Thanks Look around there for some O rings we have had this same problem with ...
someone has taken apart my chipping hammer and removed all the wires . im trying to find a wiring diagram or schematic You can try entering the nameplate data here ...
30 questions posted
Usually answered in minutes!
9 Questions
2 Questions
1 Questions
0 Questions
2 Questions