Mtd 22" Yard Machine Push Mower "self propelled bent shaft" Questions

...self propelled lawn mower model 12AE449D011. It sounds like it is running very fast and vibrating badly. Is this a control/carburator or bent shaft problem? Sounds like a bent shaft, or bent blade. ...

self propelled 22in blade hit a rock broke tip of blade starts then stalls poulan pro self propelled push mower 22inch blades key start model pr625y22rkp Did you bend the crankshaft. To check this out

self propelled lawnmower, i hit a large stone! its a briggs and stratton quantum 60 ic engine. can i repair without taking whole engine apart? Not a good idea to try to straighten the shaft. Once done

THE WOODRUFF KEY INBETWEEN THE PROPELLAR SHAFT. IF ITS BENT REPLACE IT. ALSO CHECK THE TOP END OF THE PROP SHAFT FOR ANY MISS ALIGNMENT. IT SOUNDS LIKE THE ROCK IMPACT MADE SOMETHING LOOSE IN THERE>

...bent shaft to me as well. If hitting is the only issue I would simply align the blades,loosen one blade,turn it slightly(two blade widths) so they don't touch, and retighten if the blades are hitting ...

...key is sheered a more in depth fix. If you get it started you may notice a whole lota vibration due to a bent crank shaft or maybe not? Husqvarna leaking oil from air filter. Is a 7021F ...

...Self Propelled 625 series Briggs and Stratton, 190 CC 22" cut I was mowing and gently swiped the side of a plastic swing and it shutdown. Now when I went to pull the starter cord it will pull but ...

...bent and out of balance , maybe you hit something solid in the yard ??? anyways blades need to be replaced / rebalanced) if you continue to use a out of balance blade then shaft seal on engine will ...

...it. If it still doesn't pull easily with the plug removed then you've probably either bent the crank shaft or seized the engine, due to a lack of oil in it. Hope this helps. Best of luck. ...

...bent the shaft and that would cause vibration also. remove the spark plug and rotate the blade with your hand, you should be able to tell ifi the shaft is bent or not if not try putting a new blade ...