LG WM-1832C Front Load Washer "broken belt" Questions

Ad

Question about LG WM Washing Machines

1 Answer

...belt broken replace It pumps, but doesn't spinlid switch open, or defective +motor coupler broken+belt broken+clutch worn+motor defective.+transmission not shifting properly+basket worn It spins ...

Ad

Question about LG WM Washing Machines

1 Answer

...belt is off/broken. You should be able to access either by taking the lid off (2 or 3 screws), via a panel on the back or just tilt the machine forward and look from underneath with a torch. If the ...

Ad

Question about LG WM Washing Machines

1 Answer

belt is broken or looks quite worn, replace it--but be sure to check the pump pulley before you change the belt. If the motor isn't running, the lid switch may be defective. If so, the washing machine

Question about LG WM Washing Machines

1 Answer

belt is broken or looks quite worn, replace it--but be sure to check the pump pulley before you change the belt. If the motor isn't running, the lid switch may be defective. If so, the washing machine

Question about LG WM Washing Machines

1 Answer

belt is broken or looks quite worn, replace it--but be sure to check the pump pulley before you change the belt. If the motor isn't running, the lid switch may be defective. If so, the washing machine

Question about LG WM Washing Machines

1 Answer

...loud on high speed spin cycle Either bad motor, motor bearing, tub bearing or idler pulley (also broken motor mount). Unplug unit. Spin tub by hand. Try and feel if spins freely. If direct drive ...

Question about LG WM Washing Machines

1 Answer

...call an appliance repair service person. 3) The belt may be loose, worn, or broken. If you're fairly handy, tighten or replace the belt, otherwise call an appliance repairperson. Pl post back ...

Question about LG WM Washing Machines

1 Answer

...broken impeller. If that's the case replace the water pump. Note: if you have a belt driven washer, check the belt(s) for cracks, as this would be a perfect time to replace the belt(s) if needed. ...

Question about LG WM Washing Machines

1 Answer

...of thought here. 1st. the belt has slipped off the retention pulley. 2nd the belt has broken. Pull out the machine, unplug then remove back lower panel look under the drum to see the belt and

Question about LG WM Washing Machines

1 Answer

...belt is slipping/broken Belts are not expensive- sorry I do not know how much yours would cost- and are easy to be changed by a competent person:- REMOVE POWER FROM THE MACHINE AND REMOVE THE BACK. ...

Not finding what you are looking for?
LG WM-1832C Front Load Washer Logo

321 questions posted

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...