Question about LG WM Washing Machines
...press the spin speed button until the next higher spin speed from your last successful spin. Press start. Your washer should now pump out and attempt to reach the new spin speed, without adding any ...
...press 'spin speed' and 'soil level' at the exact same time. Then, while holding both buttons, press power to start "QC test mode" 3) Press Delay Wash button, then ' tst ' is displayed on lcd 4) Press ...
...press the spin speed button and it will select the "drain and spin" cycle. Pressing the spin speed button again will select different spin speeds as well as just "drain". Something you might try ...
Question about LG WM Washing Machines
...press SPIN SPEED button only. 3. press START/PAUSE button/ http://www.givemefile.net/smanuals/_washing_machines/lg/file/38585.html Page 20. 7-2. QC TEST MODE.The washer must be empty and the controls ...
...press the spin speed button, selecting the next higher spin speed. Now press start, and your washer will just do a 14 minute or so pump and spin. For super wet heavy loads, if you cannot even get the ...
...see a button that allows you to change the spin speed what you do is when you turn it on DO NOT select a cycle just press that spin speed button then press start and it will do a spin only cycle
first selection "soil level", just press the spin speed then start. Is the problem that it is noisy and shaking? try to level the feet. The installers should have given you a wrench to accomplish that
...Press the SPIN SPEED and SOIL LEVEL buttons simultaneously. Press the Power button, while pressing the SPIN SPEED and SOIL LEVEL buttons. Then buzzer will sound twice. Press the Start/Pause button ...
spin Press the SPIN SPEED and SOIL LEVEL buttons simultaneously to enter QC test mode and check the frequency of the water level, if the display shows 248 or more: NO: Check the sensor switch assembly
buttons simultaneously, press the "Start/Pause" button twice. Does the drum spin slowly? If not, it could mean that the stator assembly of the motor is faulty or that the main PWB board may be faulty
321 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
245 Questions
234 Questions
195 Questions