...TEST MODE AND EVERYTHING WORKS FINE. I RAN IT AGAIN IN TEST MODE AFTER THE OE ERROR AND IT WONT SPIN OR DRAIN IT ONLY STARTS TO WORK AGAIN WHEN I LET IT SIT FOR A WHILE. SOMEBODY PLEASE HELP ME OUT, ...
Question about LG WM Washing Machines
...Any ideas? Lift up the top of your washer and there will be a code and test sheet in there that will help lead you to fixing that problem, almost sounds like it went into the its own test
test mode (Refer to section 7-2). 7-2 says turn the washer off, then press 'spin speed' and 'soil level' at the exact same time. Then, while holding both buttons, press power to start "QC test mode" 3
...test mode, the drum did spin, and a loud, unusual growl emitted from the washer, much like the sound of a motorcycle. All other tests were successful so I know it is not a pump problem, etc. Can you ...
...test mode and check them out to see if how the are fuctioning. Caution must be used. DO NOT GO INTO TO TEST MODE WITH CLOTHES IN UNIT AS IT WILL NOT BALANCE OUT FIRST AND WILL BOUNCE ALL OVER, AGAIN ...
...test mode and check the frequency of the water level, if the display shows 248 or more: NO: Check the sensor switch assembly and also the pressure hose, replace either if faulty. YES: Press the ...
...again. GGRRRRR! Please Help. This time the motor moves much more. I can cycle through several test modes this time but last time the motor did not move at all. Thanks, Jay Jay, have you tried
Question about LG WM Washing Machines
TEST MODE.The washer must be empty and the controls must be in the off state. Press the SPIN SPEED and SOIL LEVEL buttons simultaneously. Press the Power button, while the above condition. Then buzzer
Question about LG WM Washing Machines
test mode? do you know the button combination to put the washer in test mode? i believe it is the power button along with the two center buttons on the right. The washer must be empty and the controls
321 questions posted
Usually answered in minutes!
1,845 Questions
401 Questions
245 Questions
234 Questions
195 Questions