LG WD-1280FHD Front Load Washer "heat pump beeps" Questions

...beeps Just sorted mine .pump was stuffed ,cuts out on thermal, overload ie over heats,thus water is not fully empty so will not carry on to next step ie spin 2 plugs ie wires and undo a couple of ...

BEEPS AND CUTS OFF 2 MINUTES BEFORE CYCLE ENDS DISPLAYING F 02 CODE? The F 02 error code is a long drain problem. It could be that there is something clogging the drain line or a kink in the line, the

...remaning window a H and a F appear flashing and a series of beeps. what is happening? it could be your heating element have it tested with volt meter... or check your filter in water outlet

...beeps. It takes about 2 hours to do a load now cause we have to keep pushing the start button and it keeps repeating cycles. Any ideas on what to do? Hi there. There may be a problem on the control ...

heat up etc.  .... I have an AEG lavamat W1050 which would stop mid cycle and the end light would blink 11 times. I cleaned out the pump housing (which was chock-full of gunk) as per instructions

...beeps. I see others have asked about similar issues with this washer, but I havne't found any solutions. Hoping someone knows out there... Thanks! The drain filter is clogged. I had the same problem. ...

pump was running for an extending time, it may be heat stressed. That would be a much cheaper repair. Further ideas in this link https://www.google.com/search?q=Fisher+%26+Paykel+Smart+Drive+Pride+5.5

...beeps. have to turn off the power button to restart but often cuts out again after a minute or three. runs through the spin cycle ok. possibly control board? i'd suspect if it was balance ...

...3AUDIBLE BEEPS WHATS UP DOC check water pump filter if ok check pump assy......also check heating element with volt meter************TURN APPLIANCE OFF BEFORE TESTING

...heat switch on the pump where it won't work if hot but then will work once cooled possibly? :eek: Internet research - can be tricky and misleading so I'm looking for something more ...