LG WD-1280FHD Front Load Washer "turning" Questions

The drain pump only turns 1 turn counterclockwise and clicks to a stop. What happened? I replaced the belt. Thanks for the solution. The real problem seems to be the drain pump. It was running noisy. ...

Aquasmart bowl not turning freely, problem with stator assembly? As the bowl cannot turn freely, the machine won't spin. With out the rotor on, the shaft turns ok. Put the rotor back on and ...

Motor Hums but will not turn. This occurs in all cycles. The basket will fill properly. At selected level, motor activates, hums and does not even slightly turn. Basket can be turned, and pulley below

my machine wont turn on before it didnt turn on it wouldnt wash when it tried made a noise i turned it of then tried to turn on it wouldnt turn on What is the model number of the unit?

i need to adjust the water level on my wash machine i found the screw to adjust the water level . which way do i turn the screw Turn 3 turns CW, if not OK turn 6 turns CCW.

...to off then turn it one programme to the right, press the rpm button and keep it pressed while turning one more programme to the right, release them both and a number should be displayed on ...

...my but an object obstructing the pump I would check the filter and make sure the pump purpler is turning you can check the by turn it with a screw drive it must turn freely make sure you

...belt, motor pulley and other pulley's are free to move? but belt just stays there with out turning any thing? can you turn the center transmission pulley in BOTH directions it turns one ...

...don't see any broken pieces. Reinstalled pump and noticed that the center pulley wheel was only turning when manually turned. The agitator now doesn't appear to be turning during cycle unless ...

...position 10 (9 clicks after letting go of the buttons) and note the error code displayed.Continue turning the dial until you get to off. Now turn to any programme, then, turn to off