Kodak EasyShare M863 Digital Camera "factory settings" Questions

...to default settings / factory settings will solve your problem. Use your camera user manual to know how to reset the camera to factory settings. I hope this is useful in solving your problem. ...

...factory have calibrated brightness & contrast settings.So if you replace display from other camera the brightness may be higher\lower than you used to.Manually adjust this settings is

...only way it stays on is if its in favorites. Get to the menus if you can. Then set all menu settings to factory settings. Try the camera then. If the error continues, then the camera may need

...want to try this: Reset the complete menu back to the factory settings, most cameras have this setting. What tis may do is to reset all settings and may solve the problem...if not at least we

...IN PICTURE I HAVE A KODAK 10X CAMERA. WHEN I TAKE A PICTURE IS HAS LINES IN IT take pictures on different settings, then check, also check if there is any default factory setting, if its there reset ...

...it to auto already? And then try to take a test shot again? If possible, try to change the settings back into factory defaults again. Everything is set under the menu. So you just have to explore

...with my easyshare z1285 the images are all of a pink colour? Try going to the setup menu and setting the camera back to factory default settings. It could simply be an option that was set by

my camera screen is all blurry try to set it to factory mode, be sure lens is clean or you setting is appropriate. turn it off for a while then on it, see if its works.

...the flash the picture is fine,but when using the flash the picture is real dark... chk the white balance settings on ur camera.....or restore to factory settings...restart the camers...sud be

...not erased any saved picture on your camera, but better to do a backup for incidents of accidental erasing it. This will reset the camera settings into factory default. Hope this helps Let me