remove back panel Hello, I have a tech that cant seem to figure out how to remove the back panel of the viewsonic N3251W - I am looking for any instruction on how this is done. You have to remove the ...
...back cover, then, use a small flat head screw driver to push down the plastic Clip inside the LCD Monitor star at the bottom of monitor. Then you can easily separate the front bezel and back cover ...
...cover. is this for the remote? This is usually on the back and you can either press and slide, lift the cover by moving the clip up or by removing one or two screws from the back to remove the
...back from the inside. Removal of the two screws does not solve my problem. Ralph it likely has plastic clips that go all the way around the outside of the housing, just gently pry it with a flat head ...
Question about Televison & Video
...the back off the tv to check the mains fuse in the TV but can not get the plastic back off even removing all the screws.Does the back clip on? is there a nut that holds the cable connector in ...
...as a non-working tv with a good LCD. I have removed all the screws but I can't seem to take the back panel off to get inside the TV! Any help or tips on how to remove the back off of a Vizio
...clip inside the door of the player and slowly pull back. Remove dvd, then gently pull tray back as far as it will go naturally. After it is back, press the eject button and it should realign itself ...
...clip on the left side. Unplug these cables, remove the PCB and re-solder the sockets (there are approximately 40 solder points on the back of the board). Reassemble your TV and it'll work just
back over the battery, ensuring it covers the battery not the springy clip protruding from the circuit board. Align the 4 clips with the gaps they fitted in before and press into place in all 4 points
565 questions posted
Usually answered in minutes!
60 Questions
51 Questions
34 Questions
38 Questions
34 Questions
