Power light flashes hooked up a different monitor and it works fine sometimes if I unplug the soucrce and leave monitor plugged in it starts working This problems it alway the tv power supply board ...
Turning on the monitor When I push the power botton, the light on the TV goes to red as usual. But when I next press the green button on the remote control the light begins to flash and the TV monitor
monitor goes black after a few seconds Tv turn on now,picture flashes only few sec. just dies and have sound left only?Yes,than a long board call the LCD inverter board is dead.This LCD inverter board
...have proper tools, electronics knowledge, and know safety precaution then please read on: Basic LCD monitor and TV troubleshooting guide: ...
...flashing red/green and tv will not power on lg du-37lz30 Common problems for most LCD and Plasma tvs sets.The tv power supply board it is the causes and problems,that the board where the tv a/c power ...
...http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums ...
...repaired at minimum cost. Flashing red is an alarm code from the processor only. Indicates a monitored fault by the processor - is of no danger of causing further damage. The power ic coverter ...
...died have audio left only?Yes,take ur tv aparts and carefully check ur tv power supply board that board where the tv power a/c cord plug into it.Carefully check the tv power supply board for dying ...
...have proper tools, electronics knowledge, and know safety precaution then please read on: Basic LCD monitor and TV troubleshooting guide: ...
...Please read my guide so you will know what to look for: Basic LCD monitor and TV troubleshooting guide: ...
115 questions posted
Usually answered in minutes!
217 Questions
184 Questions
127 Questions
73 Questions
76 Questions