honda 5000 generator clear oil out leaking thru air intake There is supposed some oil in there. There is a tube to the carb intake that allows flow like a pcv valve
Question about Coleman Electrical Supplies
What weight oil do I use for a 5000 watt Coleman generator Depends on the temperature where yuo will operate it, but a good multi-viscosity oil like 10W-30 should work. 5W-30 for cold climates.
Question about Pramac Electrical Supplies
oil and what kind to use on a es 5000 generator it has a 9.0 honda motor you should have a drain plug at the side and bottom of the motor crank case its a small plug with a square head how old is your
oil for a Coleman 5000 Generator? What type of oil do I need for a Coleman Powermate 5000 Generator with a Subaru 10HP OHC gas engine? I don't have (and can't find online) a manual for the engine. I'm
Question about Honda Electrical Supplies
...5000 generator with remote starter running rough.. tis like ******* or something.. oil was almost empty so i stopped generator and added oil and restarted.. can u give some advice as to how to remedy ...
Question about Coleman Electrical Supplies
need oil type for generator & motor for 5000 power mate oil type for generator Unless you're in very cold locations use SAE 5W30 regular motor oil. I have put oil in it but still not working
Question about Coleman Electrical Supplies
...5000 watt generator leaking oil into air filter, clean oil, but why would it be there? the muffler is also running hot and has a black residue film surrounding it. CHECK OIL LEVEL. MAY HAVE TOO MUCH ...
Question about Electrical Supplies
...5000 watts with 10 horsepower Briggs and stratton engine and I cannot start the engine after an oil change; there does not seem to be any spark at the plug when I try to start it. I do not have the ...
...does the powermate 5000 use What type of oil does the 10 up Briggs use a 10-30 multi weight oil should work fine, in the winter, if it gets cold there, a 5-30, if it gets super hot in summer, a ...
...5000 - starts easily, runs for 5 to 20 minutes and then sputters and dies... If the fuel filter (strainer) is OK, carb gives enough fuel for the load you apply, air filter is dry and clean, your ...
89 questions posted
Usually answered in minutes!
549 Questions
64 Questions
47 Questions