...engage" you mean that solenoid clicks, the starter motor is not turning, but the bendix wheel is engaged to wlywheel. This may mean that the bendix relay power contacts are bad or starter motor ...
Question about Briggs & Stratton Electrical Supplies
...starter spins but will not engage to turn flywheel. Thought it might be battery but have charged and rehooked up. I have also lubricated starter shaft which now turns easily, but will not engage. Any ...
...is free to move. also verify that the solenoid throws the pinion out to engage. You can bench test the starter to verify operation. Also check condition of the ring gear via the starter mounting
Question about Generac Electrical Supplies
generac 17kw standby generator, starter will not engage into engine, just spins If it spins and will not engage it needs removing and the bendix gear on the starter is probably worn or damaged
Question about Electrical Supplies
...starter will spin but not engage and turn the engine. Is this a bendix issue and can this be changed without changing the whole starter? What does a new starter cost? bendix is actual the spring that ...
Question about Yamaha Electrical Supplies
...starter spins but will not engage the engine, what is the problem? The starter Bendix gear must be stuck in the disengage position, and is not engaging the flywheel. Try hitting the starter with a ...
starter wont engage,battery is good Remove the starter and bench test it with auto booster cables /put the black on the starter case and touch the stud on the rear of the starter. It should spin ...
starter engaged while running, what needs replaced? Remove starter, look a starter gear, if in good condition still, and gear moves freely lubricate shaft and gear with very light oil while spinning ...
Question about Generac Electrical Supplies
...starter wants to engage again, I have checked power on the 15 and 16 wire from the voltage Reg and I have 158 vac ,I also see no hertz on the meter ,what voltage should I have and should there be ...
starter turns not engage CHECK THE GEAR ON THE STARTER IS THE GEAR STRIPED OR THE BENDIX NOT PUSHING THE GEAR OUT YOU MAY HAVE A BROKEN SPRING IN THE STARTER
338 questions posted
Usually answered in minutes!