Weiser Lock Powerbolt 1000 Lock "remove old codes" Questions

...old code) on my Powerbolt 1000? The steps below are to change your access code to a new code. This will also remove any previous codes stored in the Powerbolt's memory. Manually put the bolt in ...

...old code) on my Powerbolt 1000? The steps below are to change your access code to a new code. This will also remove any previous codes stored in the Powerbolt's memory. Manually put the bolt in ...

...old code) on my Powerbolt 1000? The steps below are to change your access code to a new code. This will also remove any previous codes stored in the Powerbolt's memory. Manually put the bolt in ...

...remove the old cod yes i enterd the new cod but the old one still works This model lock will hold 2 codes, so apparently all you've dons so far is add a second code. Try reprogramming it again, ...

old code number and enter a new number. I would like to know how we can do this. if you look on top of the unit, you should see a small screw - remove that screw. now you will need a small stiff wire,

Pressed the red button inside my safe to reset code, now it won't accept the old code and it is locked Remove power supply for a day and then try original factory code.

...Old version remove battery and press any button. New version remove battery, press any number for 10 seconds,release, reconnect battery, press and hold the A button within 3 seconds, 6 beeps, release ...

How do you remove your old lock codes and reprogram new codes? Thanks. See this website for more info - http://www.weiserlock.com/Support/Faq/50160000000HhhZAAS.aspx

...old code still remains in the unit, you will need to perform a hard reset of the unit. To perform a hard reset of the unit, remove all four batteries and leave them out for 1 hour. After the hour has ...

...old code still remains in the unit, you will need to perform a hard reset of the unit. To perform a hard reset of the unit, remove all four batteries and leave them out for 1 hour. After the hour has ...