Dell OptiPlex 330 Desktop Desktop Computer  "green light monitor goes" Questions

...light a solid green,rear lights -2 top green ,bottom 2 amber.No buzzers.Every time I plug in a monitor the screen goes black.Both monitors I tried are good when used on other computer.I can't get to ...

...light is green, on the board is an amber Led, the somputer boots up, it goes the full process, until the arrow appears on the monitor. no Iconn are displayed on the desktop I`m running Windows XP on ...

...light (when turned-on) stays amber turns green for a second, then goes to amber again? cable connection issue between computer and the display? Adjusted the cable? Tried another monitor? Safe mode ...

light up A- green B- amber C- green D- green and the light on the mother board is steady amber. The light on the monitor will go from amber to green momentarily, the screen stays black. Any Ideas? yep

...light is solid green and on the back panel diagonistic lights gets off and sometimes b is yellow and other are green.I have dell gx270 with 2.8ghz processor,768Ram,40GB hard, and sony combo. I WOULD ...

...green for a moment but goes back to blinking amber light. If the power light is blinking amber, the computer is receiving electrical power, but an internal power problem might exist.A power supply or ...

...GREEN(the indicator light)-but after about 5 seconds,instead of the picture coming on the indicator light goes AMBER---like it is powered/powering down,and the screen stays BLACK.The computer sounds ...

...green or no light at all? 1. Disconnect all the connection at the back of your computer tower 2. Press the power button of the computer tower for 15 seconds 3. Reconnect the power button and the ...

...green, the startup fails most of the time. sometimes it recommends system repair or system restore but these hardly go through to the end anyway. whole days can pass and my computer wont turn on. on ...

...light on machine stays on, and green, but nothing comes on the screen. Led on motherboard is orange. The first thing to check would be the CMOS to see if there is a setting for "case intrusion" or ...