Dell Inspiron 1525 Notebook "begin test" Questions

press the power button to power the computer on. Release both buttons. The PSA diagnostics sequence begins. Make note of any PSA beep codes or PSA error codes Check for PSA Error codes on support.dell

...or restart it if it is already on. Listen to the number of consecutive beeps when the computer begins to boot. Restarting the laptop may be necessary and should not harm the laptop at this time. ...

test error (0334 or 0333) is given and the user presses "Y" to continue testing, the LCD BIST will begin. During the LCD BIST, a solid color screen is shown and 5 different colors are displayed. While

...that should not be done unless to get rid of a particular compatibility issue to begin with), but if it passes POST then it is likely fine. You may want to reset the UEFI/BIOS, and ...

...test fine. If I place both cards in, run a diagnostic, the card in Dimm B slot fails with address errors (Dell diagnostic gets to 50% and address errors begin). I am assuming that it tests Dimm A ...

press the power button to power the computer on. Release both buttons. The PSA diagnostics sequence begins. Make note of any PSA beep codes or PSA error codes Check for PSA Error codes on support.dell

begin to flash or Diagnostic boot selected is displayed in the upper right corner of the screen. Release the key. The PSA diagnostics sequence begins. After approximately 2 minutes the system produces

...safe mode. Technical information : *** STOP : 0x00000073 (0xC000017D, 0x00000004, 0xF6D8ABB8) Beginning dump of physical memory Physical memory dump complete. Contact your system administrator ...

...says "show updates">When the list populates, choose the update and remove it. If the battery begins charging again, then your problem is solved. Tell Windows Update not to install that ...

...part number found on its back at the upper-left side and write it down. The part number will begin with the letters "P/N." 4 Compare the part number on the back of the adapter with the ...