Gestetner - DSm675sp Digital Imaging System with Scan - Print Copier "check document open adf" Questions

...check the document feed area to make sure there is no foreign material. If you find foreign material, carefully remove it. Close the Feeder Cover. Note : If documents remain in the ADF after pressing ...

check document Open the ADF In my more I misplaced the manual. My printer is telling me Check Document Open the ADF ???? What do I do? Bettye Chancellor Imageclass D661 Cannon Printer would be a good ...

check the document feed area if there's foreign material. If there's any, carefully remove it. 6. Close the Feeder Cover. NOTE: If documents remain in the ADF after pressing during scanning, [Document

...open the Document Feeder Cover. 4. Raise the Paper Release Lever, then remove the jammed page from under the roller to the Document Feeder Cver side. 5. Pull out the jammed document from the ADF. 6. ...

Check document. Open the ADF code is constantly "Check document. Open the ADF" This code is constantly displayed. I don't have the owners manual but don't see much to open on the Automatic Data Feed. ...

...Check the position of the ADF document guide: Lift up the ADF unit. Locate the document guide on the underside, as shown here: Figure 7. The ADF document guide is a white, flexible plastic flap. The ...

...Check the paper in the ADF The condition of the paper or the amount of paper loaded in the ADF might prevent the ADF from picking it up and feeding it through the product. Make sure that no more than ...

...Check document Please open the top cover to the Auto Document Feeder (ADF) and examine the paper sensor switch located in the middle area, just before where the paper enters the ADF. You will be ...

...along the white strip that covers the small glass area. Also check the acturator that hangs down and goes up when the paper is placed in the document feeder (ADF) normally it should be handing ...

What to do window says check document open ADF? That means: open adf cover ( auto original feeder ) and remove jamed paper. Probably adf needs some maintenance, clean rollers.