Question about Bajaj Discover DTS-I Motorcycles
...harley fl fuel tank gasket top plate torque specifications Torque specs for oval Gas tank top plate While pushing down on the canopy, align holes in canopy with those in fuel tank. Hand start ten new ...
...gas tank. Disconnect the positive terminal of the battery. Take the chrome cover strap off the top of the bike. There is a little plate under that. Your fuel pump is connected to that. Lift it up. ...
...gas tank top plate screws for 1999 Road King? Just make em tight and dont strip em! Usally parts like this, that are not related to some real mechanical aspect of the vehicle dont have torque specs ...
gas tank that has had fuel in it could be dangerous. Here's a picture of a gas tank set up for fuel injection: http://www.jpcycles.com/product/720-896# Notice the large hole on top, for the fuel pump
Question about Bajaj Discover DTS-I Motorcycles
...gas leak on the left side where the wires come out. Do I need a gasket and how easy is it to fix? Thanks! If you mean on the top of the tank under the speedo, once the screws that hold the access ...
Question about Bajaj Discover DTS-I Motorcycles
...gas tank. This was a common problem with Softails. Try taking the top plate off the tank and bending the float arm away from the tank. You will want to replace the top gasket and 10 sealing screws ...
Question about Bajaj Discover DTS-I Motorcycles
...harley sportster does not run at pure idle. IWhen I give it gas it runs fine. Just need to increase the idle on that front cylinder. Ok, first off, this ain't no Yamaha you're messing with. It's a ...
Question about Bajaj Discover DTS-I Motorcycles
...Harley and aftermarket parts suppliers have a kit to replace these contacts. You should even have to remove the starter to do it but I would recommend going back and disconnect the battery. Problem ...
Question about Bajaj Discover DTS-I Motorcycles
...gas, yes there is a possibility it will not pump. I had a 1976 XLCH, that I had to do the top end on. I checked the oil pump and replaced the gear set. I believe there may be a wear plate on either ...
Question about Bajaj Discover DTS-I Motorcycles
...gas tank, release the pressure of the push rods on the top end, usually take off the exhuast, pull the cam chest cover, pull the cam support plate, and then you can replace the oil pump. Dont forget ...
43 questions posted
Usually answered in minutes!
260 Questions
200 Questions
81 Questions
72 Questions
67 Questions