Question about Honda GL 1000 (K1 Motorcycles
Bike still back firing.Bike has after markert pipes and I am unsure if jet have been changed bought bike used it did not do that when I first got it. did you get it checked for cylinder pressure? take
Question about Honda GL 1000 (K1 Motorcycles
1981 XJ 650: bike not firing all the time.but when it do it bac... Bike not firing all the time.but when it do it back fire. visit xjbikes.com there is a lot of info there .
Question about Honda GL 1000 (K1 Motorcycles
bike runs good its just it back fires due to me busting the pipes out but i can handle the back fire i was just wondering if it would hurt the motor any? baffles are on a bike for a dual reason one it
...back out and gauge them? plugs are normally preset,not sure of your bike but sounds like you may have put plug caps on wrong plugs and firing order is now wrong. if its a 4 cyclinder bike , 1-4 fire ...
...bike without worrying about getting back home. im not certain as i dont have a maintanance manual for that bike, but intake valve clearance should be approx .004 and exhaust valves should be appxox ...
Question about Honda GL 1000 (K1 Motorcycles
...back to you with a reply to your idle screw question due to a software problem Has the bike been unused for a long time? Please review your last 2 questions (which I've answered) & gimme some ...
Question about Honda GL 1000 (K1 Motorcycles
...75 wing and it just back fires starts up cold blooded idles 1000rpm reves up slow is it out of time coils backwards point backwards???? Has the bike been apart this sounds very like a timing
Question about Honda GL 1000 (K1 Motorcycles
...bike 1and2 in front just back fires If you crossed them up then the plugs are bad now,you will need to replace them.From the front of the bike, sitting on it; Right side, 1 & 3. Left, 2 &
Question about Honda GL 1000 (K1 Motorcycles
back firing, and then the front cylinder would start falling down. Then the front cylinder would just stop after the bike got warm. I took it to my friend?s bike shop to fix it. We did it all!! tested
Question about Honda GL 1000 (K1 Motorcycles
bike back, it wood not start .checked to see if it was firing, no fire . ohmed out wiring ok,switches ok, only thing i found was a burnt fuse 10 amp on the ignition side. replaced fuse still would not
21 questions posted
Usually answered in minutes!
188 Questions
186 Questions
195 Questions
148 Questions
151 Questions