...light directly to the solenoid?? yes you can..but how are you going to turn it off when you dont need the light? seems like a hassle to each time when you need light connect it to the selenoid,
Question about Honda XL 125 R Motorcycles
i need to know can i get my cyinder bored without having it sleeved 1994 cr125r There is quite a bit of work re-boring cylinder blocks, you will need over-sized piston(s) which has to be turned down ...
...XL 125 R Honda 125 cc 4 stroke what type of gear oil @ Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever ...
...like a diagram of a honda xlr 350 kickstart assembally 1984-1985 model This should be what you need. All the parts shown are available at www.babbittsonline.com/parts/viewbybrand/parts.aspx ...
need to know part #'s for honda atv rear wheel, bearings and seals. part# 42650-hm4-85. Most older Honda atv's use a 6007 rear bearing (96150-60070-10) However Parts Unlimited and Dennis Kirk sell ...
adjust timing chain ajustment Well first u need to remove the top cover and get to the cam. Remove the two bolts holding the cam sprocket and turn the engine till its at the tdc mark on the alternator
my honda 125 trail bike is very hard to shift ,why old or new might need to be broke in from riding or need to be rebuilt if old and abused also check gear oil level
105 questions posted
Usually answered in minutes!