1984 Honda VT 500 C Shadow "hand brake function" Questions

...hand brake switch mal-adjusted / faulty. back them both off (If possible) and it should extinguish. Does it still work with headlamps off?? If so then one of the switches are faulty / need

hand controls have a similar switch, although when you pull the brake in, it lets a spring-loaded button push out, which then turns the light on. It might be as easy as you just have a brake light out

hand brake activates the rear tail light and both signal lights. Both signal lights works. I have an 2003 deuce. Any help would be appreciated. Thanks - Keith You should have two filaments in the reat

...foot brake lever). You will see a switch with a little rod on it, when you press the foot break/pull the hand brake, it will come all the way out. That is when the light comes on. Hope this

...brake light don't work from the foot pedal but does work from the hand lever on a 2006 1200 sporster I have checked the fuses couldn't find any blown and the bulbs are good Normally, on most Harleys, ...

brake function is not opertating. The bulb does not light up when applying both the hand or foot controls. thank you If you're sure the bulb and socket are alright, there are two brake light switches.

...Brake pads, tires, and a new chain can add up to a fair chunk of change, but these fungible items are what they are. For me, the biggest question is the engine itself. If the engine has good ...

...brake fluid service done but it is still their, it is fine when cold but after 15 to 20 miles the lights come on again Low voltage has been blamed for ABS faults on a number of bikes, and those bikes ...

...hand break apart enough to look at the pin and it makes no change to the light when pushing it in and out so I'm not real sure of what I'm doing I'll get a new switch tomorrow and put it in !!! ...