1984 Honda VT 500 C Shadow "hand brake switch work" Questions

Ad

Question about Honda VT 500 C Shadow Motorcycles

1 Answer

...hand brake switch mal-adjusted / faulty. back them both off (If possible) and it should extinguish. Does it still work with headlamps off?? If so then one of the switches are faulty / need

Ad

...venture royale hand brake light no working make sure switch on handlebar has power to it try to manually operate the switch to see if it works , does the brake light work when using the foot

Ad

bar mode. The foot brake does not light up. The Brake works but no light The brake lights do not work when I press the foot pedal. It does work when I hit the hand brake. Replace the rear brake switch

Question about Honda VT 500 C Shadow Motorcycles

1 Answer

hand lever still works the light Late model Harley's have been having a problem with the rear brake light switch. Replace. A quick test is to unplug the two wires from the brake light switch, and jump

Question about Yamaha Motorcycles

2 Answers

...is a switch on the back brake and one on the front hand brake. Bulbs at the end of their life cycle will always remain on (or flash repeatedly) to let you know they need replacing. Replace your

hand brake light not working Could be a defective front brake switch. Check the electrical connections going to the switch beside the front brake lever, it may just be that you have a loose connection

brake light does not come on with the foot pedal or the hand control. foot stopped working months ago. the hand control just went out. I tried to cross jump the back switch and the light did not light

Question about Honda VT 500 C Shadow Motorcycles

1 Answer

...brake pedal or hand lever is applied..Ive checked all bulbs,circuit breakers and fuses which are not defective.If it is a wiring problem..how do I isolate the defective area? Check the wires on the ...

Question about Honda VT 500 C Shadow Motorcycles

2 Answers

...brake fluid reservoir just aft of the right hand side panel. The black plastic adjustment nut is on top of the switch body. Turn the nut clockwise until the brake light comes on when the footbrake ...

Question about Honda VT 500 C Shadow Motorcycles

1 Answer

...no break lights Could be a simple fix. Spray some WD40 into the switches and them work them on and off. Remember that there are two brake switches. One for the hand brake and one for the foot

Not finding what you are looking for?
1984 Honda VT 500 C Shadow Logo

225 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...