2000 Husaberg Fe 400 "throttle spring diagram" Questions

...spring on the carb. Make sure you have approx' 0.2 of a movement before throttle starts to open, second cable (closing one) is 'tight', it can be adjusted at bars and carb and that the cables are ...

...throttle cable out of my carb and the spring and needle and all the other stuff went flying everywhere im not sure how it all goes together Go to the site below where you can see a parts diagram for ...

throttle shaft if there is a hole in the choke lever, then put one end of a light spring in ti and find/make a section that bolts onto the carby base bolts or off the motor so that there is just a bit

...diagram 2 see how it goes on 79 honda goldwing 1000 Not sure if this is what you want. If the carb rack is fully built up: 1) remove the air cutoff valve from behind the #1 carb. Be careful not to ...

throttle cables and choke cable from the carb one at a time and label it. Remove the fuel line, and vacuum lines one at a time and label it. I know it seems foolish to label a cable but if you have to

...throttle up it wont retract and the cable seems to gimp up in the casing.... is there a diagram you can send me of what the assembly looks like ... is there a spring missing.. im lost thanks colin ...