2000 Husaberg Fe 501 "cam man" Questions

...man myself but thought this may help I get this question often for YZ yamahaa if your cam is installed you will never get the chain over it on - YZ at least, you need to place chain over cam sprocket ...

...cam harley road king ? harley brand ? syn or regular multi grade ???... Harley brand would be expensive but you cant go wrong if you use it. They cant blame you. Now syn vs regular? synthetic oil is ...

...was told, ok tried in vain to get it started but it wont, got spark, but no compression, i take the cams off and i got 50psi im kicking over by hand , put the cams back on per the man. and zero ...

...noise. Sounds like lifters but this is supposed to be self adjusting I think. sometimes automatic cam chain tensioners freeze up or run out of adjustment. if it's frozen up you can replace it with

man, a very good mechanic, or someone seeking adventure if you install new rings. There are a lot of parts and the cam chain re-assembly leaves no room for error. I would do it, but then again, I have

...man, I had a similar problem and worked out that the timing was out.Check the valve timing as a worn camchain can force it to jump a tooth or two on both the intake cam sprocket and exhaust ...

exhaust push rod constantly going loose,even after adjusting rocker arm,is the camshaft or follower busted?? If you are certain that the upper parts are not just working loose. I would make sure that ...

...man i got it off said it cut out on his mate and has been sitting for 8 months since and never got round to looking at it . i got it home and started working at it there . first problem i found was ...