2003 Husaberg Fe 400 E "wont rev cdi" Questions

Ad

Question about Husaberg Fe 400 E Motorcycles

2 Answers

wont go any further. Pleash help me. I have the same issues,only the rev counter works but the di gi speed is all over the place,then had "no cdi" indicator on display,,bike wont start now just coughs

Ad

Question about Husaberg Fe 400 E Motorcycles

2 Answers

Wont rev past 3/8 throttle!! I NEED HELP. My 96 yz250 will run fine at lower rpm's but when u go over 3/8 throttle it acts like its hitting a rev limiter and bounces revs real quick....could this be ...

Ad

Question about Husaberg Fe 400 E Motorcycles

1 Answer

...rev up, had to replace cdi, if you need cdi, buy one from dynatek cdi, dont buy one from procom, they wont last about 2 days, i know from past experince, dynatek.com. these boxes increase spark, ...

Question about Husaberg Fe 400 E Motorcycles

1 Answer

wont rev past 4000 rpm when hot, carbs ok , replaced cdi and some wireing, intermitent fault only happens when hot and feels like your running out of fuel then pickes up then dies again, wont goe past

Question about Husaberg Fe 400 E Motorcycles

2 Answers

...I have 125 yamaha ybr 2010 fual injection it wont rev past 6000 in all gears pops a and bags evy now and then but seats in low revs fine till open thottle spark plug looked a bit black as ...

...wont start. I have another miler. That bikes CDI works fine. When i put this new CDI on that bike, it will start but not rev, it cuts out. Hi, Carl1963uk for this situation I would call my local ...

Question about Husaberg Fe 400 E Motorcycles

1 Answer

wont rev up, just makes a noise like a tractor sounds like carb freeze, wont rev up, just makes a lot of noise. its not carb freeze, have taken carb off and checked it over and everything is ok. taken

Question about Husaberg Fe 400 E Motorcycles

1 Answer

wont redline.....please help!!! PLEASE. have a 08/09 rs 125. just put power valve in and de restricted the cdi by drilling the hole also changed the spark plug. bike goes well but will not rev over 10

Question about Husaberg Fe 400 E Motorcycles

1 Answer

hi.i have a 750 ef-84 that suddenly doesnt rev over 3500rpm. it just shoots and sounds noisy. i changed the coils but now it wont start at all. HI,,the next things to check are the cdi and the stator.

Question about Husaberg Fe 400 E Motorcycles

1 Answer

rev past 8000RPM when cold and 9000RPM after optimal temp reached. Carbs have been balanced and i have checked air screw settings. Could it be the shimming? Running out of ideas. Going to test the CDI

Not finding what you are looking for?
2003 Husaberg Fe 400 E Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Husaberg Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5971 Answers

Marvin
Marvin

Level 3 Expert

85216 Answers

Strech
Strech

Level 3 Expert

1562 Answers

Are you a Husaberg Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...