...head how do i check the clearance and at what cam position do i check them at You need to put the shims in and fit the camswith all the caps and bolts on. Then measure between the cam lobes and the ...
...the cam timing out way out. Even a slight touch between the piston and valves can bend the valves, you may be able to confirm this if the valve clearances are too big, the head may need to come ...
...its caused by blow by on your piston, pull the head and cylinder and check your clearances, starting your bike and running it cold will wear the piston down faster if it doesn't cold seize the ...
Question about Husaberg Fe 650 e Motorcycles
...head gaskets,piston / rings, valves and clearances, spark plugs, clutch plates/springs - Really no way to tell all depends how hard you ride just address or investigate when power loss or hard ...
Question about Husaberg Fe 650 e Motorcycles
...piston slap. Is it time for rebuild? Do you recommend to rebuild head as well (valves and seats)? First, let's assume that the valve tappet clearances are set correctly and the cam chain is properly ...
...piston and ring but no compression,,, I got timing for valve and timing chain when the head was off did you remove all the valves and re seat them with lapping tool and paste ? are the valve ...
5 questions posted
Usually answered in minutes!
2 Questions
1 Questions
1 Questions
1 Questions
1 Questions