2005 Hyosung GT 650 R "jet carbs" Questions

Ad

Question about Hyosung GT 650 R Motorcycles

3 Answers

only running on full choke? hi can any one help?i have a hyosung gt125 04 plate and for the last few weeks have been having problems with acceleration and idling(basically cuts out when there is no ...

Ad

Question about Hyosung GT 650 R Motorcycles

5 Answers

...the gas/air mix). ,,, Do you have a aftermarket exhaust? If so then your bike probably wasn't re jetted after the exhaust was installed. A rejet kit is like 50 bucks, try that. mate i had the same ...

Ad

Question about Hyosung GT 650 R Motorcycles

2 Answers

jet is located on this carb. I own a 1981 yamha xs650 and am trying to tune in my carbs cause I am running a 2 into 1 exhaust system. I don't see any mention of an air jet in the exploded view of this

Question about Hyosung GT 650 R Motorcycles

1 Answer

...jet in the carbs and makes it hell to start a bike when they are plugged up. Good thing for you, is that you only have one carb, and it is very easy to take out and clean. The jets are under the ...

Question about Hyosung GT 650 R Motorcycles

1 Answer

...amp; a Sceamin Eagle air filter backing plate with K & N filter. I want to change the main carb jet without removing the carb. I have removed the carb & changed the jet before, but I think it ...

...carb for dirt ect Check the carb. again. Research to find a similar carb. and locate the "MAIN" jet in your carb. The main jet controls high rpms or high revving. There is most likely a small ...

Question about Hyosung GT 650 R Motorcycles

1 Answer

...carbs,remove black top and the spring,carefully remove the rubber diaphragm,the slide and jet needle will come out,turn them upside down,remove float bowl,remove float,remove the little brass jets, ...

Question about Hyosung GT 650 R Motorcycles

1 Answer

changing carb jets Hi, I have a 1995 750 Yamaha virago.the jets are to big in the carbs,and I wanted to know how to put the original jets back in the bike.I have the jets. Thanks Terry the main jets ...

Question about Hyosung GT 650 R Motorcycles

1 Answer

...carbs but the main jet should be the one that has a passage that runs directly into venturi and the compensating jet should be in the same body/housing and in the base of this housing is another jet ...

Question about Hyosung GT 650 R Motorcycles

1 Answer

how do i lean out carb on 2003 dyna This is done by changing the main jet for full throttle adjustments, adjusting the metering rod (jet needle) clip position for midrange and the pilot (slow) jet for

Not finding what you are looking for?
2005 Hyosung GT 650 R Logo

108 questions posted

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

john h

Level 3 Expert

29494 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...