2003 kymco 250 venox just stopped running,checked for ignition ,no fire to spark plugs. C.D.I. is my first thought. Coils and pulsar usally dont go. I have the exact same issue. Did you solve problem?
Question about Kymco Venox 250 Motorcycles
...ignition changed cdi unit. still no ignition. any ideas? wayne Hi and welcome to FixYa, As in most bikes, the CDI is dependent on the other parts of the ignition system. Check the connection / status ...
...CDI unit. The ignition switch is usually located on the right side of the handlebar and has three wires connected to it: a red wire, a black wire, and a white wire. The red wire from the ignition ...
...CDI with ignition switch on; for a pulsating voltage (high ACV) at the white / blue wire coming from the CDI going to the ignition coil; for a pulsating voltage (low ACV, 0.5VAC) at the green wire ...
Question about Power Motorcycles
...cdi from ignition. Wires at cdi don't match any colour leaving the ignition and was hoping not to have to strip it all apart. Please can someone help with the ignition off ,use a multimeter set on ...
Question about Kymco Venox 250 Motorcycles
...it recieves a direct hit. ive gone through the wiring in the CDI side and it doesnt seem to be anything wrong with the wires. try to check your ignition coil.or your ignition switch might be
Question about Yamaha Motorcycles
...ignition circuit check for safety micro switches not working right up to the CDI power to the CDI but no spark --replace cdi power from the cdi nut still no spark --replace the coil AS to not ...
...is the function? the CDI goes out /goes bad lots. The CDI is your ignition. It stands for Capacitor Discharge Ignition. If it keeps going out then you have either a poor connection or a bad CDI
kawasaki cdi price WHERE I FOUND CDI COIL? CDI Ignition Coil 80cc Motor Motorized Bicycle Bike MoTeC Ignition Systems CDI Coils
29 questions posted
Usually answered in minutes!
22 Questions
5 Questions
1 Questions
3 Questions
2 Questions
