1978 Suzuki GS 750 E "points gap" Questions

...points cover turn motor by hand when 1st timing mark comes around gap non adjusrable pionts,turn by hand all way round till 2nd mark comes up set adjustable points this should get u close then use a ...

...points, whats the point gap? and and the spark plug type and gap? Point gap is about .018" if you can get the timing aligned there. If not, vary the gap slightly. Spark plug is NGK BPR5ES-11 with a ...

...gap,and isert between the points. There should be two screws,one on each end of the points. Loosen those two screws,and the body of the point will move,one way to "open": the gap,the other to "close" ...

...the cam that moves the point assembly apart on the middle of the high point the points can be set with the required gap between the open points to give the required dwell for coil primary

...points gap for a Yamaha LT2 Factory spec is .014" First, file and clean the contacts. The procedure is to set the timing and THEN check the point gap. If the gap is too wide, bend the top contact arm ...

Points gap for Kawasaki KE 125 Can some one please tell me the points gap measurement for a Kawasaki KE 125? Point gap will be .14. Make sure after you set the points at .14 you attempt to insert a ...

points gap is 14 to 16 Thou. Inlet valves 4 thou, exhaust valves 6 thou. I dont know the settings in metric, so using a set of imperial feeler gauges, that measure in thousands of an inch. An easy tip

what is the {points gap} on a 1979 gs425L what is the {points} gap on a 1979 suzuki gs425L .014"-.016" is the point gap

...two plugs but you can check that by swapping the coil packs if you still don't get spark check the points or cdi system If you do get spark place the spark plugs back in and hold the throttle all

points gap on 632 Bobcat TAKE A MATCH BOOK OPEN IT SLIDE BETWEEN POINTS THEN SHOULD BEE CLOSE SHOULD BE INSIDE MOTER HOUSING STICKER OF POINTS GAP AND PLUGS GAP