1981 Suzuki GS 750 L "ignition timing" Questions

...GS 750 LX I would like to know how you set the ignition timing on this bike and how to locate the timing marks?thanks if its the same as the 1100 then there is no setting the timing is factory ...

...a 1981 Suzuki gs850 , I'm pretty I'm restoring a 1981 Suzuki gs850 , I'm pretty sure the ignition coils are shot as it starts fine when cold but has a hell of a time starting when hot. My ...

...ignition timing marks for my 1981 Suzuki gs850 g If you don't have a manual, check out the gs resources . com. Forums, info, and good people. I got a 1979 3 years ago, and the info there is ...

...ignition, new leads, plugs, caps etc. It will start first time but will backfire and sounds very lumpy. Have tried advancing and retarding the the timing. The carbs have been stripped and cleaned. I ...

ignition relay mod for the gs, it will give you direct feed from live to coil (its a long, long thread) its called `coil relay modifications for the gs` i can`t remember where i got it so i can`t do a

...Ignition Timing " www.dansmc.com/ignitiontiming.html But set the ignition timing? NO WAY... they are scared stiff of it. Others figure they can throw in a new set of points, set the gap with a ...

...ignition timing through the timing plug on the crankcase. Why do you think the timing could be out?? valve timing is not adjustable once initially set up. ignition is electronic so it doesnt change, ...

...timing on my electronic ignition on my motorcycle Unfortunately, you can NOT change the timing with a electronic ignition. The only way to adjust the timing is to either have your "ECM" reprogrammed, ...

...accessible in case you forget it. With an assigned fob present, turn the "IGN" key in this pattern: Ignition-Off-Ignition-Off-Ignition. Press the left turn signal three times.Press the right turn ...

1994 ZX-9R, Having to turn the ignition key on and off a couple times to get it to start up. It is worse when the bike has been ridden. It happens about 20% of the time. I have had the ignition switch