2000 Harley Davidson FLSTC Heritage Softail Classic "39 neutral" Questions

...39;s acutally 36-44 ounces. Stand the bike straight up and remove the derby cover, drain the primary, and refill until the oil comes to the bottom to the outer clutch drum, the aluminum right around ...

...neutral The backfiring and dying while going down the road sounds like an ignition problem. A wire loose somewhere or something temporarily shorting the system out. If the engine is hard to start in ...

...neutral light. Cheers any help would be good! Chris Put the bike in gear with the engine not running. Try to push the bike. If the bike rolls freely, the final drive belt is broken. Check the tension ...

...39;t switch to neutral. Also when the engine is not running I can switch into neutral just fine from first, but when it's running I can't. you have to get in neutral before you come to a ...

...neutral it's hard to find neutral . I have to barely tap the shifter When I put the bike into neutral it's hard to find neutral . I have to barely tap the shifter check for air in clutch ...

...the cluch or it will jump and roll if you start it in gear a car doesn't hav a kill switch if you get out of your car and it's in gear or in neutral on a bike u got to think a little bit ...

...position. 3. Clutch adjustment All kawasakis will only go into first or neutral when stationary...it's kawasaki's neutral finder system. You have to be going approx 10mph to select

...ignition switch and the indicator light should light up. If it does, replace the neutral switch. If it doesn't, you've got a wiring problem between there and the indicator lamp. Good Luck ...

its in neutral but the neutral light won't come on and it won't start, I've wiggled the reverse bar but it still won't come on could be bulb or sender

...39;s your experience level with this or any bike? Neutral would normally be a "half click" between 1st and 2nd - meaning with first all the way down, you would need to make a gentle step up on the ...