2000 Harley Davidson FLSTC Heritage Softail Classic "wont idle" Questions

...wont idle harley wont idle , runs great,wont idle.its a 96 heritage softail,carberated.......... Your bike has an idle screw on the carb. looking at carb its on the right side turn to the right to ...

...at idle. If the rpms drop off while spraying an area, that's where the leak is. WD40 makes a mess but wont damage the paint. If it isn't an intake leak check throttle cable routing and

...wont charge , runs fine but drains the battery down to nothing, just put a new battery on this springso I'm pretty sure thats not it where is the stator located and do you have any other suggestions ...

wont idle I have a 2006 Kawasaki concourse that will start but wont Idle with out the choke on. Seem to run better if the the fuel stop **** is on prime but it still wont idle. Whats causing this? You

wont idle at all c i can start it fine with the coke on but when it is started it wont idle by its self it will idle by it self like 5 mins later. its a 4 stroke cfr 230 honda 2004 Low speed carb idle

wont idle how to adjust carb Make sure your spark plug is not fouled and the gap is correct, also air filter is properly cleaned. If it still wont idle, locate the idle adjustment on the carb. There ...

wont idle bike ran fine two weeks ago now it wont idle unless choke is engageg. Drained tank thought had water put in new gas and additative no luck. stick rag over #4 carb and it will idle. REPALCED ...

wont idle off choke,also cannot find idle control scre bike wont idle off choke/unable to locate idle control screw. you may need to replace your spark plugs as the idle should remain constant as long

...wont idle sometimes wont idle down when shifting or stopsd Won't idle down: look for dry/rusted/frayed inner throttle cable. Look for sluggish fuel flow from tank for starting problem. May have to ...

wont idle down choke is off but it wont idle down If idle speed control won't bring idle down check intake hoses for leaks. With bike running, spray WD40 onto intake surface near carb and head. If ...