Question about Harley Davidson FXDWG Dyna Wide Glide Motorcycles
my left signal wont cancel and comes on always when i turn on ignition but will not work when i push signal switch you have to open it up at the grip, somethings loose and shorting in there.
Question about Harley Davidson FXDWG Dyna Wide Glide Motorcycles
...Ignition Switch is in the "OFF" position. 2. Ignition Switch is faulty. 3. Engine Run Switch in the "OFF" position. 4. Engine Run Switch is "FAULTY" or corroded. 5. Check the battery terminals for ...
Question about Harley Davidson FXDWG Dyna Wide Glide Motorcycles
...ignition switch turned on, one of the wires that are plugged onto the switch should have battery voltage on it. When you depress the rear brake pedal, both wires should have voltage on them. If not, ...
Question about Harley Davidson FXDWG Dyna Wide Glide Motorcycles
...ignition switch to "ON", then release the trip odometer reset switch at which time "diag" will appear on the LCD display where normally the odometer reading would be. When "diag" appears you are in ...
Question about Harley Davidson FXDWG Dyna Wide Glide Motorcycles
...ignition on and push start button, power goes out. all fuses are good, circuit breaker appears to be good as is starter relay. only problem i can think of is starter switch is bad but don't know how ...
Question about Harley Davidson FXDWG Dyna Wide Glide Motorcycles
ignition switch, check for loose connections and continuity. 5. Failed system and or ignition relay, check for continuity. 6. Failed ignition coil, ignition/electronic module. 7. Failed CKP, CPS, CMP,
Question about Harley Davidson FXDWG Dyna Wide Glide Motorcycles
...ignition turned on to confirm you have power to the bulb socket by connecting your test light to battery negative or ground and probe the centre contact, the test light should illuminate if not you ...
Question about Harley Davidson FXDWG Dyna Wide Glide Motorcycles
ignition switch..have to use kill button..will start without key in ignition switch but obviously power valve wont work until key is put in and turned to first position...have stripped ignition switch
Question about Harley Davidson FXDWG Dyna Wide Glide Motorcycles
...but the run circuit goes through the kill switch, you can try jumping those wires to it. Also your problem as occurred with some friends, was faulty ignition switch which I believe is your
Question about Harley Davidson FXDWG Dyna Wide Glide Motorcycles
Ignition switch wont come out I have a 2008 street glide. I removed the inner fairing to paint it. I took the ignition switch out and when i put it back in, it turns and wont do anything. It wont come
118 questions posted
Usually answered in minutes!
230 Questions
114 Questions
104 Questions
30 Questions
20 Questions