2003 Harley Davidson FLHTC Electra Glide Classic "crank position replace sensor" Questions

...Crank Position Sensor, or Cam Position Sensor is likely to be the problem. If there is no signal from crank position sensor, bike will not fire the coil. ECM has no referance to position of motor. ...

...crank position sensor at the front of the engine on the left hand side by the oil filter. Make sure the crank position sensor is plugged in. The sensor can be removed and cleaned, sometimes that will ...

...crank position sensor on 2001 with volt meter, what should reading be if good / reading if bad ? been testing ohms , setting meter at 200 owns, get reading and not steady, readings are different. So ...

...position sensor, spark plugs, ignition coil. Cranks at first, then no longer cranks after about 10 tries. Have powerbank/inverter hooked to battery full bars. P0340 is bad connection/signals from the ...

I have a yamaha r1 and it's showing error code 12? Bike won't crank The error code 12 on your bike is a crankshaft position sensor malfunction. Just means you should replace that sensor.

...Crank Position Sensor. Although there have been a lot of people that have said they replaced the sensor and either still come up with the same code or the PO 374 which has something to do with the ...