2004 Harley Davidson FLHT - FLHTI Electra Glide Standard "ultra classic front" Questions

...ultra classic ? Take the two bolts out that hold the front caliper onto the fork slider. Lift the caliper off and take the pads out. You must compress the brake caliper piston back into the caliper ...

...Ultra Classic Injected - FLHTCU I Not too hard - Undo the two bolts on the caliper and then seperate the caliper and pull the old ones out. Insert the new ones and put the bolts back in to hold the ...

ultra classic torque spec's on Rotors front Axle's front and rear 2013 ultra classic torque spec's on Rotors front Axle's front and rear Front axle nut torque 70-75ft lbs, rear

...Ultra Classic: tire pressure for a 2004 ultra classic... Tire pressure for a 2004 ultra classic 30 psi in the front and 36 in the rear for single rider. Two up riding, raise the rear tire to 40 psi. ...

2010 harley ultra classic, front axle nut, front brake calipers Front brake caliper front, axle nut torque specs Front caliper - Brake Pad Pin = 75-102 INCH lbs. Caliper to Fork Bolts = 28-38 FOOT lbs

...nut and front brake caliper bolts 2005 Harley davidson ultra classic caliper torque 28-38 ft lbs,front axle nut torque60-65 ft lbs. front brake rotor torque 16-24 ft lbs. straight from harley

...ultra classic. i want to put in the radio from the ultra classic to power the speakers in the front and rear. do i need a new wiring harness to do this? i dont care about the cb or intercom, just the ...

locationof a voltage regulator on a 1999 harley davidson ultra classic On the front of the frame between the down tubes, behind the front tire.

...is the drain plug located on a 1992 electra glide ultra classic harley Davidson On a 1992 Ultra the oil tank and drain plug are located under the right side panel in front of the right hand