...the the end that goes over the pipe still on the bike and then bolt the new tips on you may need to have them put some sort of mounting bracket on the new tips to keep them from drooping and
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
bracket and on one for the brake switch. remove and install new switch. you will need to bleed your rear brakes and if you have abs , take it to the dealership to have them do a abs bleed procedure on
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...bracket bolts at the sides of the lights and re-setting the lights to a new level ?? currently it seems to be set for riding with a pillion passanger or heavy load at the rear as the lights are set ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...bracket from the transmission. THEN remove the 12 fasteners that secure the oil pan to the transmission. BE SURE that the engine oil fill plug/dipstick is removed before attempting to slide the oil ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...bracket, this should be unbolted using a metric 17 spanner, same catchment used for oil filter. On LH above your cluth pedal should be you oil filler hole, you should be able to open it by hand only. ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...exhaust, the rest saturates the air filter and then eventually gets blown all over the side of the bike. The best way to vent it, is to route a hose from the breather system down to the frame between ...
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
bracket install the two socket head screws and alternately tighten them to 43-48 ft-lbs (58.3-65.1 Nm), install a new cable strap 1.25 in. (31.8 mm) in front of the brake hose crimp capturing the rear
...bracket on it A tin can patch, some muffler paste, and a couple of hose clamps will seal it and make it quiet. It will not be pretty but it will work. The patch will keep the bike quiet till the next ...
Exhaust Pipe holder I have a 02 r1150 rt with a broken rear exhaust bracket,can I just get the holder or do I need a new muffler? Any update on your problem yet JP?
Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles
...bracket. Place one of the bolts in the hole and tighten to hold it on. Put the remaining bolt in place and tighten them both securely once they are aligned correctly. Step6 Repeat this process with ...
366 questions posted
Usually answered in minutes!
586 Questions
242 Questions
159 Questions
145 Questions
121 Questions