1988 Honda XR 600 R "trigger coil resistance" Questions

...trigger coil with a multimeter. As long as the resistance value is normal, the coil is generally fine. The resistance of the ignition coil is generally more than 300 ohms for most models, and the ...

...thermostat for opening its ok check resistance / continuity of power wire from battery to coils / ...

trigger coil. I don’t know what that is unless it is the magneto trigger, and the voltage and ohms are okay. I’m stuck. I have the service manual heres a service manuhttps://www.motorcyclemanuals.info

coil or trigger box. You can check the pulse coil, AC volt scale, something a little less than 1 volt when you turn the engine over. Two wires from the engine, don't have a diagram for your bike handy

...trigger wire from the coil to the tach is shorting out, or even broken internally inside the outer insulation coating. You are loosing your sparks on either one or both coils. It can come from ...

...trigger coil , it could be completely dead.that would be the black/yellow and green/white wires coming from the engine case,they should read around 125 ohms and have about 4 cranking volts,make sure ...

...coil is bad? 3. Crank trigger $70.00. How would I check this? 4. Ignitor $500.00! Ouch. How would I check this? Obviuosly I am going to go ahead and start with replacing the coil(s), I hope my haynes ...

...coil packs as i had a known good one and it still did the same thing, what could the problem be? could it be that it will crank but not start even if the kickstand is down? Hi and welcome to FixYa, ...