1991 Honda VT 600 C Shadow "cdi ignition wiring" Questions

...ignition system ( points/ cdi /ign. module) there is a stator and a rotor. and a signal generator. on your motor the signal generator wire sends a signal to the cdi, every time the rotor rotates. the ...

...ignition switch for power to CDI with switch on. Check all wire connections; clean and tight? Any abraided wires? Disconnected wires? It is probably a grounded kill switch. Can I get a ?very helpful? ...

...Cdi's wires are wrong,like Greens and L/G or black and Yr/B or both! If wrong ,the engine can start but ignition and injection may emulated ,next was yours intake maybe lears. : Honda Steed vlx 2005 ...

...CDI unit. The ignition switch is usually located on the right side of the handlebar and has three wires connected to it: a red wire, a black wire, and a white wire. The red wire from the ignition ...

...cdi from ignition. Wires at cdi don't match any colour leaving the ignition and was hoping not to have to strip it all apart. Please can someone help with the ignition off ,use a multimeter set on ...

...CDI with ignition switch on; for a pulsating voltage (high ACV) at the white / blue wire coming from the CDI going to the ignition coil; for a pulsating voltage (low ACV, 0.5VAC) at the green wire ...

...on your engine.Green wires from switch are all earthing wires.The black and white wire coming from the switch is the wire that puts the cdi to earth to disable the ignition in the off position

...it recieves a direct hit. ive gone through the wiring in the CDI side and it doesnt seem to be anything wrong with the wires. try to check your ignition coil.or your ignition switch might be

ignition coil that goes to the CDI; check the terminal/pin of the black wire at the connector before the CDI; check the 4 wires from the pickup coil, their connectors and their connections to the CDI.

...and/or dirty connectors -- is the most likely cause. Just an added resistance of 0.3 Ohms or more in the CDI to Coil connections will cause the ignition to fail. No other wires have to be this