1993 Honda VT 600 C Shadow "removing rear seat" Questions

Ad

Question about Honda VT 600 C Shadow Motorcycles

1 Answer

Where is the battary located on this motorcycle? Honda vt600 1995 under front seat , remove rear seat .then remove front seat ,then there is a plastic cover remove it and your there

Ad

Question about Honda VT 600 C Shadow Motorcycles

1 Answer

...rear seat to install new saddlebags http://www.bikebandit.com/houseofmotorcycles/1993-honda-shadow-vlx-600-vt600c-seat/o/m151542sch24319 It looks like there is a bolt (#4) on each side that needs to ...

Ad

Question about Honda VT 600 C Shadow Motorcycles

1 Answer

...seat and then remove the single bolt that holds the rear of the gas tank down. From that point, slide the tank back and off of the two rubber bushings that the front of the tank is resting on. ...

Question about Motorcycles

1 Answer

...rear of seat, with key and unhook or unbolt the seat from inside tool box. Pull lever on right or left side, up under the seat. It can also be at the rear of the seat, right or left side, again up ...

Question about Honda VT 600 C Shadow Motorcycles

1 Answer

...rear seat on my 2004 Intruder 800 Can not remove the rear seat. I take it you have removed the rear bolt holing the rear of the rear seat to the body of the bike. The rear seat is then pulled ...

Question about Honda VT 600 C Shadow Motorcycles

1 Answer

...seat to the rear fender. Use a 5-mm Allen wrench to remove the screw. Lift the rear of the passenger seat slightly and pull it away from the rider's seat. Use the 5-mm Allen wrench to remove the ...

Question about Honda VT 600 C Shadow Motorcycles

1 Answer

go to the rear fender center and remove the single bolt there securing the rear seat section - gently lift up and to the rear and the seat will come off then gently remove the front section (if 2 pc )

Question about Honda VT 600 C Shadow Motorcycles

1 Answer

rear seat pillion, then removing the remaining pillion support. To install it install one pillion support but do not tighten its fasteners, install the wave washer and bushing on each pillion support,

Question about Honda VT 600 C Shadow Motorcycles

1 Answer

...clears the grab bar or luggage rack. The front end of the rear seat is secured under a tab so after removing the single bolt, simply slide the seat toward the back of the bike and it will come

Question about Honda VT 600 C Shadow Motorcycles

1 Answer

...the rear seat has a bolt in the cream color tab at the front of the seat, remove bolt and lift up and slide seat forward or remove the rear portion from its retaining piece at the rear. Good luck - ...

Not finding what you are looking for?
1993 Honda VT 600 C Shadow Logo

70 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...