2006 Honda VTX 1300 S "remove speedometer" Questions

2005 VTX 1300S. I removed the tank and disconnected the Speedometer console connectors. When I reinstalled and reconnected it the console has no power. Help! I made sure the connectors went back in co

...Remove the Speedometer Connector from the back of the speedometer. Depress the external latches and use a rocking motion to separate the pin and socket halves. 7. Gently pry the three latches upward ...

...remove the speedometer housing, by first removing the seat, then remove the one small screw near the seat that holds the speedometer housing in place, also remove the small screw at the front of the ...

Replace bulb on speedometer How to change lightbulb on speedometer Remove the speedometer, remove the housing. The bulbs are in deep recesses accessable from the back.

...Not Working I was hoping someone could help me with my speedometer. I have a 99' 748 and I recently removed the front tire for maintenance. The bottom part of the speedometer that the axle goes into ...

...remove the old speedometer on my 97 dyna super glide and replace it with a new speedometer. Need instructions. The speedometer is mounted in a black casing with 5, very small lights display. I am not ...

...Not Working I was hoping someone could help me with my speedometer. I have a 99' 748 and I recently removed the front tire for maintenance. The bottom part of the speedometer that the axle goes into ...

Remove the cable from the speedometer unit and check that it is freely rotating. Oil it and put back. Next, we need to check for the gear near the axle of your front wheel. Screw the speedometer cable

Remove the cable at the speedometer drive unit on the front wheel. Inside where the cable connects there is a flat pin in the center that should turn when the front wheel is spun. If the drive unit is

Why won't my console display and display lights turn on after reconnecting electrical connectors on my 2005 VTX 1300. The headlights and running lights turn on. Turn signals work. Have not tried to ...