...check coil condition. the spark is attributed to the coil. Use a multitester to test for continuity on the terminals. No response means no connection. Another way to test this without the use of a ...
Question about kawasaki ZZR 250 Motorcycles
...Check the induction coil and measure the current output(consumed for producing the sparks. Also since you must be having an electrical starter & your battery may be low on charge! Also get the ...
Question about kawasaki ZZR 250 Motorcycles
My 1992 zzr250 kawasaki it turns over no problem but it just won't fire and I have checked s/plugs, fuel and they seem ok is this comon and how do I fix it? My 1992 zzr250 kawasaki it turns over ...
...check your harness connectors as well get some electrical grade spray and pop open all connectors and give em a good dose undo all grounds and clean and re tighten them cheapest and easiest is ...
...coil connector, check resistance across leads, should NOT be zero, and should not be infinite, consider about 100 ohms OK. (These wear out more often than the coils.) If these three checks are OK, ...
...coil) and check for primary coil winding resistance which normal resistance range is zero point five and zero point seven ohms. If primary resistance is not within this range check out test results ...
...coil) and check for primary coil winding resistance which normal resistance range is 0.5-0.7 ohms. If primary resistance is not within this range check out test results below. Ignition Coil Secondary ...
...coil) and check for primary coil winding resistance which normal resistance range is 0.5-0.7 ohms. If primary resistance is not within this range check out test results below. Ignition Coil Secondary ...
Question about kawasaki ZZR 250 Motorcycles
Check the coil first. Check your pick-up sensor located inside the timing cover, behind the adjustor plate. If the filament is not intact you will have no spark. A defective coil, cam position sensor,
...coil) and check for primary coil winding resistance which normal resistance range is 0.5-0.7 ohms. If primary resistance is not within this range check out test results below. Ignition Coil Secondary ...
20 questions posted
Usually answered in minutes!
20 Questions
13 Questions
12 Questions
10 Questions
7 Questions