...clutch lever pulled. how tight do i thighten the sprigns on the clutch? The clutch's plates must be stuck.Disassemble them and renew if necessary.The clutch lever should have 3mm freeplay and the ...
how tight should clutch basket bolts be,do you just screw them all the way down? if you mean the bolts that hold the clutch plate in the basket??...then bolts should be done down all the way!!
...clutch lever been loose. Use the locking screw and make sure it is tight - it shouldn't come loose unless you have too much play in the cable, in which case, change the cable. The clutch adjuster is ...
...tight clutch In a 1991 kx 250 does anybody know if a ballbearing is suposted to go in between the clutch actuator and the rod. (a single BB) there is not one in mine but it seems like there should be ...
tight clutch 1991 kx 250. clutch is super tight. Nothing inside is broken. checked parts diagram on website to see if im missing a washer or something. everything is there. the cable is old but when i
Question about kawasaki KDX 200 Motorcycles
...you need a new clutch. but first make sure that your clutch cable is'nt too tight. it should have a little bit of freeplay when you pull the lever. Clutch cable too tight ....loosen it and try ...
...clutch lever seems too tight.Tight enough where it causes my hand to cramp after short rides around town. Is this normal? Any suggestions would be greatly appreciated. This sounds like heavy duty ...
Question about Honda Motorcycles
......
107 questions posted
Usually answered in minutes!
14 Questions
8 Questions
2 Questions
2 Questions
2 Questions
