2002 kawasaki KDX 125 "piston rings" Questions

...clean the carb,new spark plug and do a compression test,,being that old id say it needs some new piston ...

...piston &rings they are fine but bike does not fire at all Even tho u have got a spark dose not mean the spark plug is ok try changing the spark plug and i would recheck u carb to see if the flots ...

piston rings just bought new piston rings,how easy r they to fit in to bore thanks gareth THE BIKE I GOT IS A SP 125CC 2 STROKE First, be sure they actually do fit the bore. Take a ring and insert it ...

...piston and compress rings with fingers and finesse cylinder over piston. do not force. put nuts on studs and tighten to spec in service manual. install head gasket correctly and put head on and put ...

...piston and rings on a yz125 2002 If you have never stripped down an engine get expert help .Piston rings are very fragile and can be snapped very easily .They also fit in there correct place on the ...

...rings.My question is,is there an even later model piston I could use with the same piston dimensions ( 58- 59 mm bore)but having two rings,perhaps narrower chrome rings or similar? Ken. Ken, I think ...

...piston did you use new rings or the old ones --maximum rin gap is .025" rings don't wear in , just wear out why did you replace the cylinder in the first place was it because of low compression or ...

...piston and rings with only 2 hours of riding it? When I go up a hill and rail on the throttle it sounds like a high pitch chirp or knock in the top end the question is did you remove the ridge at the ...

...piston rings on, a good trick is to carefully slide them over a couple of very thin feeler gauges. This way you don't over stretch them as they are very hard and very brittle.

To get the ...

...rings/ seals on the piston, clean gum or dirt from the piston then bleed the brakes. Check for leaks, particularly around the piston. I think that there was a ring of dirt built up around the piston ...