2005 kawasaki KLX 125 "guides" Questions

...you fit inlet valve guide seals from later 750 twins into the 1968 (small port motors) or are the guides different? Are they needed anyway? If you have guides allowing to fit them there should be

and haven't been able to locate service manual. Any other tip CAR MANUAL GUIDE FOR FREE MANUALS AND GUIDES: --- Car repair guide? http://technoanswers.blogspot.in/2012/03/car-repair-guide.html =======

I got a crf100 05 and is wondering how to tighten the timing chain because it is loose? If the chain is loose then you need to replace the chain the adjuster is automatic so you cant adj the tension ...

...smoke until the valve and guide heat up and form a better seal. I would recommend having the valve guides sleeved with silicone/bronze sleeves instead of pressing out the old and pressing in new one ...

1976 kz 900 cam chain guide broken!!! I had this 13/4 inch piece of metal come out when I was changing my oil!! I then identified it as part of the cam chain guide. I have no excess noise coming from ...

...1100 the problem i have a nocking noise in the frount cylinder, set the valves, set the chain guides. the noise is the loudes in the head pipe You mean the timing chain guides? If so double ...

...is this it??? Cam chains are self adjusting. They have a tensioner that takes up slack as the guides wear and the chain stretches. You may be able to get away with new guides if your chain

1984 XR250R - I changed front sprocket from 13T to 14T. The 14T was listed as an OEM part for the bike so I figured it should fit. Now the chain rubs as it passes over the front sprocket. Turns out ...

Regal bread machine k6276 Would like a manual Many Regal Bread Maker manuals and guides are available here: http://www.regalware.com/customer-service/breadmaker-guide-and-cookbook/ . The direct link ...

I have a 2014 KLX450r and have changed rear sprocket to a 54, problem is I cannot realign the rear chain guide to suit. What do I do? 54 is a lot of sprocket, I would go for a 52. If your guide ...