1994 Suzuki VS 1400 Intruder "shifting" Questions

shifting problem 96 1400 Intruder 4 speed I have a 1996 1400 Intruder 4 sp,I let a guy ride it and after that i've had problems on the down shift,sometimes I can only get down into 3rd.The clutch ...

My bike is clutched I have a 1998 suzuki intruder 1400. When I try to shift it into gear it stays still, even when I release the clutch lever. It even shifts into gear without having to press the ...

My 1400 gets stuck in gear,wont shift,I was down a quart of oil This sounds like a bent shift fork. A bent shift fork will not let the slider gear(s) move properly.

...to 2nd. ( I would have to double clutch) Also, when shifted into 1st it creeps. Sometimes during shifting the lever will not return to position and I have to jiggle with foot. What's up? Clutch ...

...full synthetic oil that is reasonably priced. Also , do not tap the shifter with your foot when shifting. Place your toe , pressing gently against the pedal , and then

Intruder VS 800 will shift into gear but will not engage I was riding normally and all of the sudden i lost power. At first it would go slowly and then engage full power. When i stopped at the next ...

Oil leaks from where the shift lever goes into the trans. Cover. The bike fell on its side during transport. most likely the shift shaft is bent replace the shaft and shaft seal

...during transport. You have probably damaged the rubber sealing bush or have caused damage to the shifting shalf .Strip down and inspect.to find the posible cause

not shifting properly after getting up to highway speeds when you come to a stop wont shift back into first gear Sounds exactly like a bent shift fork. Classic symptoms. You will need an impact driver

hard to shift into 1st&shifter does not return to neutral. On occasion (50%) of the time the bike will not shift into 1st without lots of -----------, Also the shifter does not return from 1st to ...