1995 Suzuki VS 1400 Intruder "clutch replacement" Questions

how to bleed the clutch rebuilt upper clutch, added fluid, but no pressure Had this problem about a month ago when I replaced my clutch and brake pipes. Ensure bike is in upright position and not on ...

my bike crank up fine, and idles fine, but when i hold in the clutch, and press my gear shifter to come out of nuetral my bike jerks and shut off, then it be hard to go back in nuetral until i rock ...

93 intruder 1400, what are the specs on clutch disk, when to replace ? Your bike is getting very old. Replace the clutch plates while parts may still be available. If the clutch is working okay then ...

CLUTCH BUILDS PRESSURE AS IT GETS HOTTER. 2000 INTRUDER 1400 3000 MILES CLUTCH WORKS GREAT WHEN COLD BUT AS YOU RIDE ABOUT 4 OR 5 MILES IT STARTS TO SLIP AND GETS TO THE PIONT OF NO CLUTCH AT ALL. ...

...clutch or the steel will corrode under the rubber sleeve causeing a loss in pressure and fluid you will not see the leaks perhaps untill you remove the old line .The neww replacement line from suzuki ...

slight sliping in third gear when accelerating hard. Does clutch need replacing If it is the original clutch I would say probably to check for sure go about 35mph put the bike in top gear 5th i ...

can u adjust the clutch and whats kind of fluid do i use to top it off on my suziki intruder 1400.96 If you are having trouble releasing the clutch - you probably have a fluid problem. Remove all ...

I have a 2002 suzuki 1400cc and I am wanting to replace the clutch becasue when it gets hot the bike won't pull its self. It has 12k miles on it and the clutch works well enough when cool, but ...

clutch piston thinking on buying this bike. the owner says he rebuilt the clutch, then the clutch piston went out. part cost $85.00. how hard is it to put one in? very easy to replace...usually not ...

I have a 1999 VS1400 Intruder clutch is slipping when I accelerate after it is in gear. If I need to replace the clutch, any helpful tips? Ya know what I had the same problem and I changed the clutch ...