Question about Suzuki VS 1400 Intruder Motorcycles
Clutch adjustment? Master - slave cyclinder issues? Bad gear box? I'm stymied. Change the fluid in the clutch reservoir,bleed out the remaining fluid.(keep it full as you go) Should be dot 4 fluid not
...cyclinder or the clutch itself? There is a bit of slippage in the clutch when accelerating quite fast. But how could that relate to the lever resetting on downshifting. The problem sometimes prevents ...
Question about Suzuki VS 1400 Intruder Motorcycles
clutch lever has no resistance & seems not to do anything. Engine cuts out when put in gear. (sidestand up!) does it have a cable clutch or hydralic clutchyou need a clutch or slave cyclinder.
...clutch will not disengage. I rebuilt the master cyclinder and have pressure to the slave cylinder but the clutch will not disengage. The bike has about 10,000 miles on it. This happened last year and ...
Question about Suzuki VS 1400 Intruder Motorcycles
...are firing...shift from neutral into gear...engine shuts off if it kind of jumps could be a clutch cable or actual clutch problem.try adjusting ur clutch cable to be a little hard to pull in ...
Question about Suzuki VS 1400 Intruder Motorcycles
clutch maste cyclinder was bypassing fluid, we took it apart, and honed it out, put new kit in, and it works great, sometimes the rubbers inside will stick, if it has been setting for a while, can get
clutch master cyclinder bleeds down . How do I bleed system 5/16 socket on a long extention on the left side just above and slightly to the rear of the drivers foot peg.do the bleed the same as the ...
Question about Suzuki VS 1400 Intruder Motorcycles
...a clutch release cyclinder the slave cylinder is located under the panel behind the gear shift. remove the panel, drain and remove the line, remove the two bolts. be careful not to lose the
Question about Suzuki VS 1400 Intruder Motorcycles
...1100. i can't get no pressure to slave cyclinder bleeder valve There is a rubber/metal tube that goes from the clutch leaver down to the transmission to the slave cylinder that's where u will bleed ...
...cyclinder Cylinders are numbered 1-4 as sat on the bike. That means when you are sat astride the bike the number 1 cylinder is on the left (clutch lever side) and number 4 on the right (brake ...
188 questions posted
Usually answered in minutes!
52 Questions
34 Questions
34 Questions
29 Questions
30 Questions