1996 Suzuki VS 1400 Intruder "gear shifting problems motorcycle" Questions

shifting problem 96 1400 Intruder 4 speed I have a 1996 1400 Intruder 4 sp,I let a guy ride it and after that i've had problems on the down shift,sometimes I can only get down into 3rd.The clutch ...

gear shift .I noticed that there were indicators that said 1,n,2,3,&4. So there you have it 4 gears on my 1994 Suzuki VS 1400 Intruder. Look for your self !!!!! Vaughn "Trooper" Holmes Sr. (Squire

I have a 1996 Suzuki Intruder 1400. The engine shuts off when I shift into 1st gear with the clutch squeezed. Any suggestions for solutions? Check the sidestand switch and the clutch switch. Both of ...

...shifting from 3rd to 2nd gear. bike is 15yrs-ajust clutch 1st-if no relief then a bottom end will have to be done and u need a clymer manual and special tools--the book covers complete maintenance Hi ...

...shifting the chances are the bike has a bent shift fork or two. A warped gear shaft or shift shaft can cause sticking also but is very rare. It is pretty costly to fix and not a job for the home ...

shifting all together, recently also repaired a CR 125 That wouldn't shift at all and it was the shaft the shift forks go on was bent and hung the shift forks. Sounds like your shift forks are bent to

hi anyone .i have a 1991 honda cr250. i can't get any gears ,can anyone help please. thanks shorty. You can't get gears > as in your foot shift lever won't allow you to change gears or as in "I busted

motorcycle and 2nd gear is going do I have to replace all the gears or just 2nd gear Replace gears in sets, the bad gear and the gear it meshes with. In what way is 2nd gear going bad? The gear may be

...gear serious problem you  have to split the case in order to get to the forks and shift drun . The shift drum  may have a bad tract that  guid the shift fork and also will caus sevior ...

...gear. The solution for my bike was to squirt spray lithium grease into the where the the shift lever rod comes out of the transmission. There is apparently a bushing that got hung up as I had never ...